Shenzhen Fire Power Control Technology Co., LTD
Through the efforts of several generations, 450,000 aviators have been united together, inspiring each aviator to forge ahead and provide professional avionics products and services in wide range of
Add to Cart
Fiber Optic Gyroscope MEMS Accelerometer IMU With BD/GPS/GLONASS/Tri-Mode Receiver
Product Introduction
The IMU70A is a high-performance IMU with an optional inertial/satellite integrated navigation system.
Built-in three-axis fiber optic gyroscope, three-axis MEMS accelerometer, optional BD/GPS/GLONASS/tri-mode receiver.
It can output the compensated angular rate, acceleration, temperature and other information.
Performance characteristics:
1. -40 ° C to 60 ° C, full temperature calibration;
2, 1 KHz high sampling rate, 1KHz compensation operation;
3, The software, algorithm, and interface protocol can be highly customized according to the user's usage scenario;
4. It can be externally connected with odometer, DVL, vision and radar for integrated navigation.
Electrical parameters
| Operating voltage | 18V～36V DC |
| Power supply ripple | <50mV |
| Maximum power consumption | System power consumption at room temperature 11 W, maximum power consumption at high and low temperature 15 W |
| Operating temperature | -40℃~+85℃ |
| Storage temperature | -50℃~+100℃ |
Specifications
| Gyroscope | |
| Range | ±500°/s |
| Zero bias stability | Second-average sampling, 10-second smoothing, < 0.1 °/H (1σ, typical) |
| Zero-bias repeatability | Ten times of power on, < 0.1 °/H (1σ, typical value) |
| Bandwidth | 500Hz |
| Accelerometer | |
| Range | ±5g |
| Zero bias stability | < 1mg(1σ) |
| Zero-bias repeatability | < 1mg(1σ) |
| Bandwidth | 80Hz |
