High Performance Single Axis Digital Optical Gyro Low Bias Fiber Optic Gyro

MFOG-095 micro-nano fiber optic gyroscope provides reliable, low-noise angular rate measurements for autonomous navigation, UAV gyroscopes, and robotic stabilization platforms.
Its micro-nano fiber technology ensures fast startup (<1s), low power (<0.7 W), and high accuracy for motion control, drone navigation, and mapping instruments.
Fully compatible with Fizoptika VG095, it acts as a drop-in replacement for precision inertial navigation systems.

Composition

The product is mainly composed of the following components:

A) an optical path assembly;

B) Detection and control signal circuit board;

C) Optical fiber coil skeleton, shell and other structural parts;

4.3 Appearance and dimension

The overall dimension of the product is 60mm × 35mm × 25.5mm (without plug).

4.4 Weight

≤70g.

4.5 Operating temperature

-40℃~+70℃.

4.6 Storage temperature

-55℃~+85℃.

4.7 Random vibration

Random vibration level: 20g, frequency range: 20Hz ~ 2000Hz.

4.8 Main performance parameters

Table 1 Main Performance Parameters

4.9 Mechanical and electrical interfaces

4.9.1 Mechanical interface

The bottom surface of the product is the installation surface. The four M3 threads on the bottom surface are connected to the outside. The overall dimensions and installation interfaces are as follows:

4.9.2 Power Requirements

The requirements for the external power supply to the product are shown in Table 2:

Table 2 Product Power Supply Requirements

4.9.3 Electrical interface

The MFOG-095 micro-nano fiber optic gyroscope is electrically connected to the outside with a solder pin.

Table 3 MFOG-095 Node Definition