Shenzhen Fire Power Control Technology Co., LTD
Add to Cart
ADIS16488 replacement good quality low cost ADIS16488 analog product
16488-HB is a domestic MEMS IMU used to replace ADIS16488. The product precision is better than ADIS16488. The version is optional, the size and appearance are exactly the same, and the communication protocol is the same.The version is optional, the size and appearance are exactly the same, and the communication protocol is the same. It is more convenient for users to change, providing users with professional product customization services.
| Parameter | Test conditions | Minimum value | Typical value | Maximum value | Unit | |
| Gyroscope | Dynamic measuring range |
|
| 500 | 2000 | °/s |
| Zero bias stability | Allan variance, Z-axis |
| 0.8 |
| °/h | |
| Allan variance, X and Y axis |
| 1.6 |
| °/h | ||
| 10 s average (-40 ℃ ~ + 70 ℃, constant temperature), |
| 3 |
| °/h | ||
| 10 s average (-40 ℃ ~ + 70 ℃, constant temperature), |
| 6 |
| °/h | ||
| Zero bias | Zero-bias range, Z-axis |
| ±0.07 |
| °/s | |
| Zero-bias range, X-axis and Y-axis |
| ±0.2 |
| °/s | ||
| Zero-bias change in full temperature range, Z-axis ① |
| ±0.02 |
| °/s | ||
| Zero Bias Change Over Temperature, X and Y |
| ±0.06 |
| °/s | ||
| Successive Start Repeatability, Z-axis |
| 0.002 |
|
| ||
| Successive Start Repeatability, X-Axis and Y-Axis |
| 0.006 |
|
| ||
| Day-by-day start repeatability, Z-axis |
| 0.003 |
| /s | ||
| Start repetition day by day, X axis and Y axis |
| 0.009 |
| °/s | ||
| Ffect of linear acceleration on bias |
| 0.002 |
| °/s/g | ||
| Influence of vibration on zero bias, change before and after vibration ② |
| 0.002 |
| °/s/g | ||
| Influence of vibration on zero bias, change before and during vibration ② |
| 0.002 |
| °/s/g | ||
| Scale factor | Scale factor accuracy, Z-axis |
| 0.3 |
| % | |
| Scale Factor Accuracy, X and Y Axis |
| 0.6 |
| % | ||
| Scale factor nonlinearity, Z-axis |
| 0.01 |
| %FS | ||
| Scale Factor Nonlinearity, X and Y Axis |
| 0.02 |
| %FS | ||
| Angular random walk |
|
| 0.15 |
| °/ √hr | |
| Noise density |
|
| 0.001 |
| °/s/ √Hz | |
| Resolution |
|
| 3.052×10-7 |
| /s/LSB | |
| Bandwidth |
|
| 200 |
| Hz | |
| Accelerometer | Dynamic measuring range |
|
| 16 | 200 | g |
| Zero bias stability | Allan variance |
| 0.06 |
| mg | |
| 10 s average (-40 ℃ ~ + 70 ℃, constant temperature) |
| 0.4 |
| mg | ||
| Zero bias | Zero bias range |
| 2 |
| mg | |
| Change of zero bias within the whole temperature range, peak-to-peak value ① |
| 4 |
| mg | ||
| Repeatability of successive starts |
| 0.5 |
| mg | ||
| Repeatability is initiated on a daily basis |
| 0.8 |
| mg | ||
| Zero-bias temperature coefficient |
| 0.05 | 0.1 | mg/℃ | ||
| Parameter | Test conditions | Minimum value | Typical value | Maximum value | Unit | |
|
| Scale factor | Scale factor accuracy |
| 0.5 |
| % |
| Scale factor nonlinearity |
| 0.1 |
| %FS | ||
| Speed random walk |
|
| 0.029 |
| m/s/ √hr | |
| Noise density |
|
| 0.025 |
| mg/ √Hz | |
| Resolution |
|
| 1.221×10-8 |
| g/LSB | |
| Bandwidth |
|
| 200 |
| Hz | |
| Magnetometer | Magnetic field range | Brg,xy |
| ±13 |
| gauss |
| Brg,z |
| ±25 |
| gauss | ||
| Resolution |
|
| 0.3 |
| μT | |
| Heading accuracy | 30 μT horizontal geomagnetic component, 25 ℃ |
| ±2.5 |
| deg | |
| Dynamic measuring range |
|
| 2.5 |
| gauss | |
| Zero bias | Non-magnetic environment |
| 15 |
| mgausS | |
| Barometer | Dynamic measuring range |
| 300 |
| 1100 | mbar |
| Zero bias |
|
| 4.5 |
| mbar | |
| Communication interface | 1-way SPI | Baud rate |
|
| 15 | MHz |
| 1-Way C A N | Baud rate |
|
| 1 | MHz | |
| Sampling frequency | SPI |
| 2460 | 2460 | Hz | |
| CAN |
| 200 |
|
| ||
| Electrical characteristics | Voltage |
| 3.0 | 3.3 | 3.6 | V |
| Power consumption |
|
|
| 1.5 | W | |
| Ripple | P-P |
|
| 100 | mV | |
| Settling time | From 0 V to 3. 3V |
|
| 80 | ms | |
| Structural characteristics | Size |
|
| 47×44×14 |
| mm |
| Weight |
|
| 50 |
| g | |
| Use environment | Operating temperature |
| -40 |
| 70 | ℃ |
| Storage temperature |
| -45 |
| 75 | ℃ | |
| Vibration |
|
| 20~2000Hz, |
|
| |
| Impact |
|
| 1000g,0.5ms |
|
| |
| Reliability | MTBF |
|
| 20000 |
| h |
| Continuous working time |
|
| 120 |
| h | |
| ①: Calculate the zero deviation of the whole temperature change process, the temperature change rate is ≤ 1 ℃/min, and the temperature range is -40 ℃ ~ + 70 ℃ | ||||||
