Shenzhen Fire Power Control Technology Co., LTD
Add to Cart
precise dual axis rate position turntable with temperature chamber
dual axis rate position turntable with temperature chamber is used to measure and calibration of dynamic and static parameters of inertial device and system under normal temperature, high&low temperature. It has over-rate, over-current, over-voltage, emergency power off protection function. The temperature chamber adopts two-door.
Main technical parameters
| Turntable | |
| Load capacity | 20kg |
| Table facet diameter | Ø400mm |
| Table facet flatness | 0.01mm |
| Table facet jerk value | 0.015mm |
| Table facet flux leakage | <4 gauss(10mm from table facet) |
| Inclination rotary accuracy | Main axis: ±1’’; pitch: ±2’’ |
| Axes perpendicularity | ±2’’ |
| Rotary angle range | Main axis: continuous; pitch: ±95° |
| Working mode | Inner loop: power-driven, position, rate, sway; outer loop: manual position |
| Slip rings | 80 rings |
| Electric control cabinet | 19’’ standard cabinet, height: 1600mm |
| Angular position measure accuracy | ±3’’ |
| Angular position measure resolution | 0.36″ |
| Angular position measure repeatibility | ±2″ |
| rate range | 0.001°/s~400°/s |
| rate range and smoothness | 5 x 10-3(360° interval) |
| Max acceleration | ≥200°/s2(payload 20kg) |
| Max angular acceleration | 200°/s2 |
| Temperature chamber | |
| Temperature control range | -50°c~+70°c(water cooling) |
| Temperature accuracy and smoothness | ±0.5°c |
| Distance from Inner wall to table facet | 500mm |
| Temperature rise and drop rate | 2°c/min |
